Q1-Can I install PPF over ceramic coating?
A1-Unfortunately, PPF will not adhere to ceramic coating. We do not recommend installing if you already have a ceramic coat.
Q2-How long should I wait to drive my Tesla after installing PPF?
A2-We highly recommend waiting at least 24 hours before driving. This ensures your PPF has had time to adhere fully so water and debris can’t get under the surface.
Q3-What temperature should I install PPF?
A3-PPF is best installed in temperatures between 65 and 75 degrees F. If it’s too cold, it may feel stiffer. If it’s too hot, it’ll stretch more.
Q4-How do I remove wrinkles (also called fingers) when installing?
A4-If it’s a small finger, the easiest way to push it down is to use your tack solution and then push it down with your squeegee. If it persists, wrap your squeegee with microfiber and squeegee it down. The microfiber will absorb the water, making it tackier.
Q5-Is it okay to leave small bubbles when installing?
A5-If it is larger than a nickel, you want to lift the PPF and squeegee it down again. If it’s smaller than a nickel, it should dissipate and evaporate within time.
Q6-How long should I wait before cleaning my Tesla after installing it?
A6-We recommend waiting at least 24 hours but 48 hours to be safe.
Q7-Do I need to cut anything?
A7-No, our kits come pre-cut to make installation easier for you!
Q8-Can I use a pressure washer to wash my car after installing the ppf?
A8-You can, but please be extremely careful. You want to be careful around all the edges. If you directly point the spray gun near the edge, it may remove the film. Don’t directly spray on the edges, and you’ll be fine.
Q9-How long does PPF last?
A9-Hansshow's film is rated for at least 5 years.
Q10-Can I put a ceramic coating over PPF?
A10-Absolutely. There are many ceramic coatings that are specifically for PPF which will make the car even easier to keep clean!
