FAQ 1：How to perform OTA (Over-The-Air) upgrade?
Reason:
- Long press the P-gear button, release after 4 beeps to initiate OTA upgrade.
- Long press the P-gear button, release after 6 beeps for after-sales OTA upgrade.
Solution:
Upgrade following the specified method.
FAQ 2: How to change the light color?
Reason: Manual switching inside the door handle.
Solution: Refer to detailed picture instructions.
FAQ 3: How many color options are there?
Reason: There are 7 colors: Rainbow, White, Green, Blue, Yellow, Red, Purple.
FAQ 4: Handle won't pop open.
Reason 1: Check if the gasket is installed.
Solution: Install the gasket.
Reason 2: Handle wire malfunction.
Solution: Swap the control and corresponding handle wires with the wires on the same side for inspection.
FAQ 5: Proximity doesn't automatically pop open.
Reason: Check if the control box Bluetooth is connected.
Solution: Connect to the control box Bluetooth.
FAQ 6: Light strip doesn't illuminate.
Reason: Check if the wiring harness is properly connected.
Solution: Reinsert the interface.
FAQ 7: Pressing the handle pops open, and the door also opens automatically.
Reason: Right after installation, check if the gasket is installed.
Solution: If not installed, install it; if already installed, remove it.
FAQ 8: Handle open malfunction mode.
Reason 1: In non-P-gear situations.
Solution:
- Short press the handle button, press the handle end, and the handle won't pop open.
- When the mobile phone is connected to the in-car Bluetooth, the handle won't open.
Intégration transparente
