Model Y Juniper/3 Highland Custom-Fit Streamer Ambient Light 3.0 with Smart Blind Spot Detection System

Note: This ambient light kit cannot be installed if your vehicle dashboard already has a screen installed.

Installation Video:

Key Functions:

• Syncs with the factory ambient light colors & supports on-screen control
• Smart blind spot detection with visual alerts
• Turn signal and hazard light-linked effects
• Door ajar and over-speed warning reminders
• Throttle-responsive dynamic lighting effects
• Charging animation when the vehicle is plugged in
• Welcome light mode upon door opening
• Fully customizable RGB lighting system with hundreds of individually controlled LEDs
  

Key Features:

Upgrade & Smart Control: The ambient lights automatically sync with the factory ambient light colors and now fully support on-screen control via the central touchscreen on Model 3 Highland and Model Y Juniper.

Smart Blind Spot Reminder: When a vehicle enters your blind spot, the corresponding side light will alert you. A weak reminder (amber light constant on) triggers for rear-side approaching vehicles. When signaling with the turn indicator, the corresponding side flashes green; if a rear-side vehicle is detected at the same time, a strong reminder (red light flashing) is activated. The 3.0 system enhances detection precision and integrates visual alerts for turn signals and hazard lights for smarter safety feedback.

Door Ajar Alert: When a door isn’t fully closed, the corresponding side light will flash in a customizable color of your choice. Version 3.0 introduces a door welcome lighting mode, where the ambient lights softly illuminate when you unlock or open the door, making every entry more premium and futuristic.

Overspeed Warning for Safer Driving: When your speed exceeds the road limit by 20%, a bright red alert flashes directly in front of the driver to grab your attention and help you stay safe on the road.

(Note: If you don’t want the overspeed warning, you can easily disable it by pressing and holding the right steering wheel button for about 4 seconds.)

Tesla-Style Driving Display Lights: Engaging AP (Autopilot) mode triggers smooth, rainbow-colored light effects on both sides, visually signaling semi-autonomous driving mode for an immersive Tesla-style experience.

Dynamic Light Effect Linked to Throttle:

Mode 1: Press the throttle, and a red light strip extends dynamically, mirroring performance-driven energy.

Mode 2: Lights transition from white to red based on throttle depth, creating a gradient effect that reacts to your driving intensity. Both modes inject a high-octane, premium vibe into your cockpit.

Real-Time Battery Heating Indicator: When your Tesla’s battery is actively heating, a red light glows directly in front of the driver. The 3.0 version adds charging animation lighting effects, giving you a visual cue during charging as the flowing light motion reflects the charging process for an advanced, futuristic experience.

Easy Installation: Installation has been further optimized in the 3.0 version with a dedicated molded design for Model 3 Highland and Model Y Juniper, fitting directly into the original trim. The plug-and-play harness connects to the reserved interface for a secure, stable, and faster setup.

Individually Addressable RGB Lighting

Equipped with hundreds of precision-controlled RGB LEDs, this system delivers a smooth, ultra-refined ambient glow that feels factory-integrated. Six professionally tuned base colors blend seamlessly with Tesla’s modern interior, enhancing the cabin with a premium, futuristic atmosphere.

FAQS

Q1 – Why is the ambient light not turning on?
A1 – Please check the wiring harness connection. Reconnecting the harness should restore functionality.

Q2 – The blind spot light doesn’t work. What should I do?
A2 – This could be caused by a loose wiring connection or an issue with the control box. Try the following steps:

1)Reconnect the wiring harness

2)Inspect or replace the control box if needed

Q3 – The blind spot light works sometimes but fails occasionally. Any fix?
A3 – This may be due to a faulty control box or a problem with your vehicle’s blind spot detection system. We recommend:

1)Inspecting or replacing the control box

2)Verifying that your vehicle’s blind spot detection system is functioning properly

Q4 – I can’t change the ambient light color. Why?
A4 – Ambient light color can only be changed when the vehicle is stationary. Please check the following:

1)Ensure your vehicle is completely stopped (speed = 0)

2)If the control box is unresponsive, try locking the car and powering it off to reset the system

Q5 – Why is the light bar flashing red on the driver’s side while driving?
A5 – This is a speeding reminder feature. The red flashing light is triggered when the system detects the vehicle is exceeding a preset speed.

(Note: If you don’t want the overspeed warning, you can easily disable it. Simply press the button on the right side of the steering wheel once quickly, then press and hold for about 4 seconds. Just make sure not to switch into Sport Mode.)