CCS1 Charging Adapter for Model 3/Y CCS1 to Tesla Adapter
Description
Compatible Models: Hansshow CCS Combo 1 adapter is compatible with CCS chargers for Tesla Model 3, Model Y, Model S, Model X. Early models(Model 3 2018) need to be confirmed for compatibility. Usually, After 2021 2022 is enabled CCS. ( You can check the system setting at Control>Software>Additional Vehicle Information>CCS adapter support to see if your Tesla is compatible with CCS. )
Fast DC Charging: Hansshow CCS1 adapter for Tesla let you charge at over 5,000 CCS fast chargers nationwide. On average 150kW - 180kW charging rate, allowing you to fully charge within a matter of hours. (Note: Charge rate will also depend on the specifications of the charging station)
Compact&Portable: Add your fast charging options with the Hansshow CCS Combo 1 Adapter which is lightweight and portable, easy to store and use for charging, just pull it out, connect it to the CCS1 charger, and then charge your Tesla.
Quality Assurance: FCC certificate. The exterior of the CCS 1 adapter adopts PC insulation thermoplastic material, and the Conductive contact pin made of copper alloy+silver plating, wear resistance and aging resistance, with the flame retardant grade UL94V-0.
Adapter Performance: Maximum rating with 500V and 300A, Hansshow CCS combo 1 adapter is most efficient at operating temperatures - 20° f to 122° F. Waterproof and anti leakage, protection grade up to IP66.
* Harness Retrofit
A DIY retrofit solution for enabling CCS1 adapter capability on your older Model 3 2018-2021, when using a Gen4 ECU (Note: Need to get the Gen4 ECU from your Tesla Service Center(SC) FIRST.
- Please check if the CCS feature is installed in your EV (HOW TO CHECK : CLICK HERE). If it’s “not installed”, then you need this wire retrofits below in order to enable the Tesla CCS1 adapter.
- Gen4 ECU : 1537264-00-B Gen4 charge port ECU (Bundle of wires need to be connected in line with Gen4 ECU )
Harness retrofit Installation Video : Click Here
NOTE:
1. Not the Tesla OEM Adapter.
2. Lead time: Ships in Early October
How To Verify Compatibility Of Hansshow CCS 1 Adapter On Your Tesla In The Car Display
Quality Assurance
Exterior of the CCS 1 adapter adopts PC insulation thermoplastic material,
and the conductive contact pin made of copper alloy+silver plating
Flame Retardant Grade UL94V-0
- External flame retardant PC+PBT+35GF%
- Safety design to prevent accidental direct contact of hands
- Life cycle of no-load plug ≤ 10000 times
Free Shipping & Return
Visit our South California official shop for the "Hansshow Official Service Store," where our experts are dedicated to After-Sale Service of your accessories. Customer Support: Email: inquiry@hansshow.com, Phone: + 1 (949) 358-4793, Tech Support: Phone:+ 1 (949) 358-4793 . North America Office: 3480 W Warner Ave (Ste. N), Santa Ana, CA 92704, USA
Free Shipping Worldwide on Non Oversized Products
We work with trusted US companies like UPS, USPS, and DHL to deliver your items. Your order usually arrives within 3-7 business days (EXCL. weekends, holidays, and custom products) . Once your order is shipped, we can't change the delivery address, so let us know within 1 day if you need to make a change. For more details, check our Shipping Policy page.
Shipping to Hawaii
Please note that some items shipped to Hawaii may require an additional $300 shipping fee after checkout. If your order is subject to this fee, our customer service team will contact you.
30-DAY RETURN POLICY
We have a 30-day return policy, which means you have 30 days after receiving your order to request a return. Just make sure the item is unused/unworn, sealed, with tags attached, and keep your receipt/ proof of purchase. If your return is accepted, we'll provide you with a return shipping label and return address. Any product returned without our prior approval will be refused. For full details on policies, please visit our Return & Refund page.
Couldn't load pickup availability
Hansshow Local Install in SoCal
Compatible Models: Hansshow CCS Combo 1 adapter is compatible with CCS chargers for Tesla Model 3, Model Y, Model S, Model X. Early models(Model 3 2018) need to be confirmed for compatibility. Usually, After 2021 2022 is enabled CCS. ( You can check the system setting at Control>Software>Additional Vehicle Information>CCS adapter support to see if your Tesla is compatible with CCS. )
Fast DC Charging: Hansshow CCS1 adapter for Tesla let you charge at over 5,000 CCS fast chargers nationwide. On average 150kW - 180kW charging rate, allowing you to fully charge within a matter of hours. (Note: Charge rate will also depend on the specifications of the charging station)
Compact&Portable: Add your fast charging options with the Hansshow CCS Combo 1 Adapter which is lightweight and portable, easy to store and use for charging, just pull it out, connect it to the CCS1 charger, and then charge your Tesla.
Quality Assurance: FCC certificate. The exterior of the CCS 1 adapter adopts PC insulation thermoplastic material, and the Conductive contact pin made of copper alloy+silver plating, wear resistance and aging resistance, with the flame retardant grade UL94V-0.
Adapter Performance: Maximum rating with 500V and 300A, Hansshow CCS combo 1 adapter is most efficient at operating temperatures - 20° f to 122° F. Waterproof and anti leakage, protection grade up to IP66.
* Harness Retrofit
A DIY retrofit solution for enabling CCS1 adapter capability on your older Model 3 2018-2021, when using a Gen4 ECU (Note: Need to get the Gen4 ECU from your Tesla Service Center(SC) FIRST.
- Please check if the CCS feature is installed in your EV (HOW TO CHECK : CLICK HERE). If it’s “not installed”, then you need this wire retrofits below in order to enable the Tesla CCS1 adapter.
- Gen4 ECU : 1537264-00-B Gen4 charge port ECU (Bundle of wires need to be connected in line with Gen4 ECU )
Harness retrofit Installation Video : Click Here
NOTE:
1. Not the Tesla OEM Adapter.
2. Lead time: Ships in Early October
How To Verify Compatibility Of Hansshow CCS 1 Adapter On Your Tesla In The Car Display
Quality Assurance
Exterior of the CCS 1 adapter adopts PC insulation thermoplastic material,
and the conductive contact pin made of copper alloy+silver plating
Flame Retardant Grade UL94V-0
- External flame retardant PC+PBT+35GF%
- Safety design to prevent accidental direct contact of hands
- Life cycle of no-load plug ≤ 10000 times
Description
Compatible Models: Hansshow CCS Combo 1 adapter is compatible with CCS chargers for Tesla Model 3, Model Y, Model S, Model X. Early models(Model 3 2018) need to be confirmed for compatibility. Usually, After 2021 2022 is enabled CCS. ( You can check the system setting at Control>Software>Additional Vehicle Information>CCS adapter support to see if your Tesla is compatible with CCS. )
Fast DC Charging: Hansshow CCS1 adapter for Tesla let you charge at over 5,000 CCS fast chargers nationwide. On average 150kW - 180kW charging rate, allowing you to fully charge within a matter of hours. (Note: Charge rate will also depend on the specifications of the charging station)
Compact&Portable: Add your fast charging options with the Hansshow CCS Combo 1 Adapter which is lightweight and portable, easy to store and use for charging, just pull it out, connect it to the CCS1 charger, and then charge your Tesla.
Quality Assurance: FCC certificate. The exterior of the CCS 1 adapter adopts PC insulation thermoplastic material, and the Conductive contact pin made of copper alloy+silver plating, wear resistance and aging resistance, with the flame retardant grade UL94V-0.
Adapter Performance: Maximum rating with 500V and 300A, Hansshow CCS combo 1 adapter is most efficient at operating temperatures - 20° f to 122° F. Waterproof and anti leakage, protection grade up to IP66.
* Harness Retrofit
A DIY retrofit solution for enabling CCS1 adapter capability on your older Model 3 2018-2021, when using a Gen4 ECU (Note: Need to get the Gen4 ECU from your Tesla Service Center(SC) FIRST.
- Please check if the CCS feature is installed in your EV (HOW TO CHECK : CLICK HERE). If it’s “not installed”, then you need this wire retrofits below in order to enable the Tesla CCS1 adapter.
- Gen4 ECU : 1537264-00-B Gen4 charge port ECU (Bundle of wires need to be connected in line with Gen4 ECU )
Harness retrofit Installation Video : Click Here
NOTE:
1. Not the Tesla OEM Adapter.
2. Lead time: Ships in Early October
How To Verify Compatibility Of Hansshow CCS 1 Adapter On Your Tesla In The Car Display
Quality Assurance
Exterior of the CCS 1 adapter adopts PC insulation thermoplastic material,
and the conductive contact pin made of copper alloy+silver plating
Flame Retardant Grade UL94V-0
- External flame retardant PC+PBT+35GF%
- Safety design to prevent accidental direct contact of hands
- Life cycle of no-load plug ≤ 10000 times